AutoCAD Civil 3D - Stormwater

Distinguished Contributor
Posts: 147
Registered: ‎10-03-2006
Message 1 of 3 (197 Views)

SSA - Modeling Cross-Connections

197 Views, 2 Replies
04-30-2012 08:49 AM

I am looking for advice on how to model storm sewer cross connections in SSA.  We have large trunk sewers that are inter-connected at a few locations.  Basically two large pipes coming together and two large pipes leaving.  In some cases, one of the pipes leaving is slightly higher than the other outlet pipe.  We tried modeling as a simple junction, but this does not seem to accurately split the flows.  Any advice would be appreciated.

*Expert Elite*
Posts: 1,747
Registered: ‎09-05-2006
Message 2 of 3 (193 Views)

Re: SSA - Modeling Cross-Connections

04-30-2012 12:58 PM in reply to: ThomasGlidewell

The program allows Flow Diversion Structures, limited to only two dischage outlets per structure (your situation).  Unfortunately that is the extent of my knowledge on this subject.





Valued Mentor
Posts: 643
Registered: ‎03-24-2009
Message 3 of 3 (94 Views)

Re: SSA - Modeling Cross-Connections

06-21-2012 07:23 PM in reply to: ThomasGlidewell

did you ever find a solution to this topic? i would be interested to know how to model split flows in SSA, like i can model split flows in HEC-RAS for open channels.


i think Bill's suggestion is great and in the right direction, as the flow diversion tool allows two outlets. my initial thought was the "overflow" option in flow diversion, but that would not be a true split flow condition, as the excess flow will only divert to the secondary link when the primary is flowing full in that case. hopefully Matt or someone very knowledgeable in these topics can shed some light into this.


 *EDIT: i *think* that you may be able to model the manhole as a storage node, as that should allow multiple outlets. just a thought. i will have to test it tomorrow.

Civil 3D 2013 SP1, Win 7-64 bit

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D