AutoCAD Civil 3D - Stormwater

Reply
New Member
JoshBoultbee4604
Posts: 1
Registered: ‎07-08-2010
Message 1 of 1 (131 Views)

RE: Inlet bypass for "combination inlets on grade" and "inlet depression":

131 Views, 0 Replies
09-19-2012 09:37 AM

Modeling the same storm sewer system that has combination inlets on grade with 2" depression will produce different bypass results in each version.

Why? Adding inlet depression to the design in the 2005 version affects bypass results whereas it does not affect bypass in the 2008 version. If the

2008 version is correct, then would it be appropriate to model a depressed combination inlet on grade by leaving the depression value at "zero" but increasing the gutter cross slope to a value that approximates the steep cross slope caused by the depressed inlet?

 

Any help would be appreciated.

Thanks in advance,

Josh

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs