AutoCAD Civil 3D - Stormwater

Distinguished Contributor
Posts: 142
Registered: ‎01-26-2010
Message 1 of 1 (258 Views)

Parking Lot Sag Inlet with Ponding

258 Views, 0 Replies
02-01-2013 10:32 AM

Hi folks,

I am trying to design parking lot drainage using SSA.


I have to restrict flow to 70 l/s/ha which means I will need to have ponds at 2 sag inlets.


To model the ponding at the inlets I have used a storage node with a weir and an orifice.  The orifice connects to a junction and water is outlet to the underground storm pipe.  The weir is at the crest of the ponding area and outlets overland.


I am having trouble with the junction and pond.  The junction seems to be surcharging and shows flooding but the pond is not filling up as desired. The intent is of course to have the junction surcharge, and fill the ponding area over top of it, then take the overland route.


Could someone assist me with modelling this pond / junction?


I have attached the SPF file.


Any help would be appreciated.


Civil 3D 2011.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D