Oil and Water Seperator Calculation?

[Anonymous]

Does anyone know a method of providing calculations for an Oil Water Seperator for a Truck Dock?

We have a trench drain which collects to a common point and then will travel through the Oil Water Seperator before it hits the outlet.

Thank you for your help!

[Anonymous]

Hi mstg007,

Have you consulted with the Authority who administer the Environment
Protection for your project? And/or the Sewer Authority?

These bodies usually have set requirements which don't need computations.


Regards

Laurie

mstg007 wrote:
> Does anyone know a method of providing calculations for an Oil Water Seperator for a Truck Dock?
>
> We have a trench drain which collects to a common point and then will travel through the Oil Water Seperator before it hits the outlet.
>
> Thank you for your help!

[Anonymous]

I would also try the manufacturer. They usually know what the agencies need
to approve their product.

--
John Mayo, PE
Project Engineer
Conklin Associates
Ramsey, NJ

Civil 3D 2008 SP2, LDT 2008 SP2, Raster Design 2008
P-IV at 3.5 GHz
2 GB Ram
Nvidea Quadro FX w/ 128 MB Ram
wrote in message news:5983857@discussion.autodesk.com...
Does anyone know a method of providing calculations for an Oil Water
Seperator for a Truck Dock?

We have a trench drain which collects to a common point and then will travel
through the Oil Water Seperator before it hits the outlet.

Thank you for your help!