AutoCAD Civil 3D - Stormwater

Active Member
Posts: 9
Registered: ‎12-23-2009
Message 1 of 2 (361 Views)

EGL and HGL Jump Error in Autodesk SSA

361 Views, 1 Replies
08-29-2012 07:20 AM

I'm new to SSA and have been testing it for the past day.  I have read through the user's guide, which states that junction losses are not used in the software.  Instead, minor losses are applied as an equivalent friction loss over the length of each pipe.  Given this calculation methodology, there should never be any "jumps" in the EGL at standard junctions since no loss is occuring there.  Each profile simulation that I run, however, invariably shows jumps in the EGL at various junctions.  Some junctions even exhibit an increase in EGL, which makes no logical sense.  Also, the HGL is droping at each junction unexpectedly too.  Could someone offer an explanation for this?  I've attached an example where the flow is constant, and all minor losses are 0.  Yet, the jumps occur.

Active Member
Posts: 9
Registered: ‎12-23-2009
Message 2 of 2 (331 Views)

Re: EGL and HGL Jump Error in Autodesk SSA

09-12-2012 09:34 AM in reply to: kahligsm

Has anyone had a chance to examine this?

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D