Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
In reviewing the results of my model, I noticed that there is an inconsistency between the peak flows being intercepted by my inlets, and the corresponding peak flows in the connected pipe. Most of the discrepancies are fairly minor; however, it is somewhat disturbing nonetheless. Could someone explain the reason for these discrepancies, or provide me with a solution for how to resolve them? Thank you.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")