AutoCAD Civil 3D - Stormwater

Reply
Member
Posts: 4
Registered: ‎12-26-2012
Message 1 of 4 (176 Views)

Average depth attained = 0

176 Views, 3 Replies
12-26-2012 01:56 PM

I just learned to use SSA. After running the model, the average depth attained is only 0.02-0.07 ft in the Node Depth Summary. What is the possible reason? Many thanks.

Active Contributor
Posts: 38
Registered: ‎05-18-2010
Message 2 of 4 (146 Views)

Re: Average depth attained = 0

01-03-2013 12:44 PM in reply to: NoWandering

Sorry.  Can't answer the question without more information or a file.

Employee
Matt.Anderson
Posts: 2,901
Registered: ‎05-13-2005
Message 3 of 4 (127 Views)

Re: Average depth attained = 0

01-17-2013 01:35 PM in reply to: NoWandering

The longer you run the simulation when the depth at your node is zero, your average will decrease. 



Matthew Anderson, PE
Product Manager
ICP
Autodesk, Inc.

Member
Posts: 4
Registered: ‎12-26-2012
Message 4 of 4 (100 Views)

Re: Average depth attained = 0

02-05-2013 07:33 AM in reply to: Matt.Anderson

Matt, you are right.

 

I figured it out before you replied this. Originally I used 30 days. After changed to 1 day, the average depth is reasonable.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs