Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

warning alert for alignments

12 REPLIES 12
SOLVED
Reply
Message 1 of 13
MonkeyTrainer
16948 Views, 12 Replies

warning alert for alignments

How do I turn off the warning CIV3D puts in my drawing when a alignment doesn't meet certain criteria? Its shaped like a triangle with an exclamation point inside of it.

12 REPLIES 12
Message 2 of 13

Go to your Alignment Properties, on the Design Criteria tab, uncheck Check for tangency between elements.



Todd Rogers
BIM Manager
Blog | Twitter | LinkedIn

Message 3 of 13
Jeff_M
in reply to: MonkeyTrainer

Alignment Style Display tab

Jeff_M, also a frequent Swamper
EESignature
Message 4 of 13

Or what Jeff_M says...turn off the Warning Symbol in your Alignment style.



Todd Rogers
BIM Manager
Blog | Twitter | LinkedIn

Message 5 of 13
neilyj666
in reply to: MonkeyTrainer

Go into the style and turn off the layer and if you want/don't want them printed it's in Options

neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


AEC Collection 2024 UKIE (mainly Civil 3D UKIE and IW)
Win 11 Pro x64, 1Tb Primary SSD, 1Tb Secondary SSD
64Gb RAM Intel(R) Xeon(R) W-11855M CPU @ 3.2GHz
NVIDIA RTX A5000 16Gb, Dual 27" Monitor, Dell Inspiron 7760
Message 6 of 13
MonkeyTrainer
in reply to: neilyj666

thanks everybody, big help

Message 7 of 13
gsharp
in reply to: ToddRogers-WPM

How do you turn off a triangle with a dot in center on your alignment?

Message 8 of 13
ToddRogers-WPM
in reply to: gsharp

The answer is above as Solved.



Todd Rogers
BIM Manager
Blog | Twitter | LinkedIn

Message 9 of 13
cvelosa
in reply to: ToddRogers-WPM

Thanks!!!

Message 10 of 13
kayci.reynolds
in reply to: cvelosa

The above steps did not work for me. 

To turn off the red triangle at the end of the alignment.

Choose Alignment properties>summary tab>+Marker> choose <none> Triangle with alignment.JPG

Message 11 of 13

This post isn't about the red triangle at the end of an alignment. It's about the warning symbols.



Todd Rogers
BIM Manager
Blog | Twitter | LinkedIn

Message 12 of 13

If you read a few comments above you'll see a question asked "How do you turn off a triangle with a dot in center on your alignment?" asked and answered! 

Message 13 of 13

Gotcha.



Todd Rogers
BIM Manager
Blog | Twitter | LinkedIn

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report