Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Make sure the Anchor Point is the Feature and not the Marker
"smokiibear" wrote in message
news:5343108@discussion.autodesk.com...
i created a station offset label, but cannot get the perpendicular line to
pass through the node of the label. it's offset a bit.
how can i make it pass through the center?
Thanks.
Mike Shick
M.E. Designs
--
Civil3D 2007 SP2
ADT 2007
P4 3.2GHz, 2 GB RAM
ATI (Sapphire) Radeon X800 Pro 256MB
smokiibear wrote in news:5343366
@discussion.autodesk.com:
>> Make sure the Anchor Point is the Feature and not the Marker
>
> It is, but the problem still occurs
I found that the marker visibilty was false, but the line was offset by the
marker that would have been there. when i made the marker a point, the
offset went away. 🙂
Mike Shick
M.E. Designs
--
Civil3D 2007 SP2
ADT 2007
P4 3.2GHz, 2 GB RAM
ATI (Sapphire) Radeon X800 Pro 256MB
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")