section not coming right

[om_gc]

The cross section at the culdesac is not coming right (attached). Instead of a gradual slope, i get a drop near the centerline. I am targeting to the CL alignment and profile. Have anyone come across such situation?. Why is it happening.

Thanks

[Nik-D · Accepted solution]

It looks like you may have the wrong profile showing. In the properties for your profile make sure you have the correct surface selected

Nik-D

[Joe-Bouza · Accepted solution]

I concur. triple check your targets

[om_gc · Accepted solution]

You guys were right. The problem was the prop. profile was little shy of the alignment. It works fine now. Thanks for your help.