AutoCAD Civil 3D General

Reply
Active Contributor
Posts: 33
Registered: ‎09-12-2004
Message 1 of 4 (119 Views)
Accepted Solution

section not coming right

119 Views, 3 Replies
10-08-2013 07:22 PM

The cross section at the culdesac is not coming right (attached). Instead of a gradual slope, i get a drop near the centerline. I am targeting to the CL alignment and profile. Have anyone come across such situation?. Why is it happening.

 

Thanks

Mentor
Nik-D
Posts: 210
Registered: ‎09-10-2012
Message 2 of 4 (83 Views)

Re: section not coming right

10-09-2013 04:04 AM in reply to: om_gc

It looks like you may have the wrong profile showing. In the properties for your profile make sure you have the correct surface selected

 

Nik-D

*Expert Elite*
Joe-Bouza
Posts: 4,493
Registered: ‎12-15-2008
Message 3 of 4 (79 Views)

Re: section not coming right

10-09-2013 04:06 AM in reply to: om_gc
I concur. triple check your targets
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Active Contributor
Posts: 33
Registered: ‎09-12-2004
Message 4 of 4 (65 Views)

Re: section not coming right

10-09-2013 05:33 AM in reply to: om_gc

You guys were right. The problem was the prop. profile was little shy of the alignment. It works fine now. Thanks for your help.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs