any way to smooth out my grades to be more rounded, as opposed to sharp angles. I just can't seem to find the correct setting.
I've seen worse. We staked a bullnose curb. Set PC POC PT & RP. All had grades and Cut/Fill. Admittedly we blew the Cut/Fill on the POC. All else was correct. Of course the mason only used the POC. The curb was formed and poured before anyone called and said that something looked peculiar. The curb climbed above the grade of the rest of the lot like the end of a ski-jump.
Now we did make an error. But no even checked the other stakes or looked at the forms and thought "something's wrong here" Sometimes I wonder.
Allen
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
You may have noticed I was particularly mindful of not pointing fingers at the surveyor
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
You have crystallized my suspicion eloquently.
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Everyone makes mistakes. This was one of the very few that left the office I used to work in. But we never assumed anything we got was correct either. Everything coming in or going out was checked.
Allen
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.