AutoCAD Civil 3D General

Reply
Member
dwaynesmith
Posts: 4
Registered: ‎08-28-2012
Message 1 of 26 (18,955 Views)
Accepted Solution

"Fatal Error: Unhandled Access Violation Writing 0x0000 Exception at 0h""

18955 Views, 25 Replies
08-28-2012 10:31 AM

I get the above error when I attempt to open Civil 3d 2013

*Expert Elite*
antoniovinci
Posts: 1,576
Registered: ‎06-03-2011
Message 2 of 26 (18,951 Views)

Re: "Fatal Error: Unhandled Access Violation Writing 0x0000 Exception at 0h

08-28-2012 10:42 AM in reply to: dwaynesmith

We're with ya in this sad moment, D.S.

If you have one, call your Autodesk dealer...

Valued Mentor
owenmull
Posts: 356
Registered: ‎09-06-2011
Message 3 of 26 (18,925 Views)

Re: "Fatal Error: Unhandled Access Violation Writing 0x0000 Exception at 0h

08-28-2012 01:42 PM in reply to: antoniovinci

Scroll down in the forum a few posts, I posted a link to solve this issue on a previous thread.

-Owen
Windows 7 x 64 bit
NVidia Quadro K3000M Dual Monitor
32.0 GB RAM
Intel Core i7-3820QM @ 2.70 GHz
Civil 3D 2013 SP 2
______________________________________________________________
Usually, I find that the problem is between the keyboard and the chair.
Member
dwaynesmith
Posts: 4
Registered: ‎08-28-2012
Message 4 of 26 (18,911 Views)

Re: "Fatal Error: Unhandled Access Violation Writing 0x0000 Exception at 0h

08-28-2012 02:24 PM in reply to: dwaynesmith

I'm sorry, I can't seem to find the post you referenced.  Can you possibly add the link to this thread?

 

Dwayne

Valued Mentor
owenmull
Posts: 356
Registered: ‎09-06-2011
Message 5 of 26 (18,908 Views)

Re: "Fatal Error: Unhandled Access Violation Writing 0x0000 Exception at 0h

08-28-2012 02:39 PM in reply to: dwaynesmith

http://forums.autodesk.com/t5/AutoCAD-2010/FATAL-ERROR-Unhandled-e06d7363h-Exception-at-7c812afbh/m-...

 

Read post # 8 in particular.

-Owen
Windows 7 x 64 bit
NVidia Quadro K3000M Dual Monitor
32.0 GB RAM
Intel Core i7-3820QM @ 2.70 GHz
Civil 3D 2013 SP 2
______________________________________________________________
Usually, I find that the problem is between the keyboard and the chair.
Member
dwaynesmith
Posts: 4
Registered: ‎08-28-2012
Message 6 of 26 (18,909 Views)

Re: "Fatal Error: Unhandled Access Violation Writing 0x0000 Exception at 0h

08-28-2012 03:34 PM in reply to: dwaynesmith

I have changed the DWORD Low to all 0000000, but for some reason when I go to open the program, it changes it back to numbers and letters.  I have tried rebooting the computer, but that doesn't solve the problem either.  Any Help?

Valued Mentor
owenmull
Posts: 356
Registered: ‎09-06-2011
Message 7 of 26 (18,879 Views)

Re: "Fatal Error: Unhandled Access Violation Writing 0x0000 Exception at 0h

08-29-2012 06:48 AM in reply to: dwaynesmith

Interesting. I've not seen it do that before. I'm sure someone else has a solution to this. Have you tried contacting Autodesk?

-Owen
Windows 7 x 64 bit
NVidia Quadro K3000M Dual Monitor
32.0 GB RAM
Intel Core i7-3820QM @ 2.70 GHz
Civil 3D 2013 SP 2
______________________________________________________________
Usually, I find that the problem is between the keyboard and the chair.
Member
dwaynesmith
Posts: 4
Registered: ‎08-28-2012
Message 8 of 26 (18,877 Views)

Re: "Fatal Error: Unhandled Access Violation Writing 0x0000 Exception at 0h

08-29-2012 07:10 AM in reply to: dwaynesmith

I have looked for a way to contact Autodesk, but have not found a method to contact them.  I originally downloaded the program as a trial to see how it works, I have used other Autocad Versions.  This is not making me want to purchase the program.

New Member
crsinc
Posts: 1
Registered: ‎11-05-2012
Message 9 of 26 (18,306 Views)

Re: "Fatal Error: Unhandled Access Violation Writing 0x0000 Exception at 0h

11-05-2012 12:46 PM in reply to: dwaynesmith

I also have a fresh install of AutoCAD LT 2013 64bit on Windows 7 Ultimate 64bit. and get this error. I tried the suggested fix and it did not help.  AutoDesk has been useless at providing and support resources, can anyone help?

Member
jkonley
Posts: 4
Registered: ‎12-03-2012
Message 10 of 26 (17,706 Views)

Re: "Fatal Error: Unhandled Access Violation Writing 0x0000 Exception at 0h

12-03-2012 06:16 AM in reply to: dwaynesmith

Any update on this error?  I have a fresh install of AutoCAD LT 2012 on a Win 7 64 bit machine and have the exact same error.  I can't get the software to run for the first time yet.  Tried uninstalling and reinstalling, tried installing the service pack.  No luck.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs