Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
i got this file with points but no elevation, the elevation text is right next to the point, is there a way to get the elevation on the points? there is no way i can go one by one on the points and give a z value.
In the Points menu choose Point Utilities and then Convert from AutoCAD
Points. You will not get any point description though.
John
wrote in message news:4839550@discussion.autodesk.com...
i got this file with points but no elevation, the elevation text is right
next to the point, is there a way to get the elevation on the points? there
is no way i can go one by one on the points and give a z value.
Sorry wrong NG. You can do this in LDD. In Civil 3D this is probable
available in the Prospector under the Points heading. Someone else will have
to chime in. I am still setting up the 2006 apps & don't have Civil 3D on
this PC.
John
"John Mayo" wrote in message
news:4841766@discussion.autodesk.com...
In the Points menu choose Point Utilities and then Convert from AutoCAD
Points. You will not get any point description though.
John
wrote in message news:4839550@discussion.autodesk.com...
i got this file with points but no elevation, the elevation text is right
next to the point, is there a way to get the elevation on the points? there
is no way i can go one by one on the points and give a z value.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")