Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
On the settings tab, right click on your drawing and select Edit Drawing Settings. On the Units and Zone tab, set the drawing scale the same as your viewport scale.
Brian Hailey <> wrote in news:5343347@discussion.autodesk.com:
> On the settings tab, right click on your drawing and select Edit
> Drawing Settings. On the Units and Zone tab, set the drawing scale
> the same as your viewport scale.
Ahh....relief. Thanks
Mike Shick
M.E. Designs
--
Civil3D 2007 SP2
ADT 2007
P4 3.2GHz, 2 GB RAM
ATI (Sapphire) Radeon X800 Pro 256MB
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")