Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

how to create expressionin structure reference alignment profile elevation

9 REPLIES 9
SOLVED
Reply
Message 1 of 10
manrajankalimuthu
519 Views, 9 Replies

how to create expressionin structure reference alignment profile elevation

i am create the stron network.I want structure profile elevation.

how to create expressionin  structure reference alignment profile elevation

9 REPLIES 9
Message 2 of 10
tcorey
in reply to: manrajankalimuthu

Hello,

 

You don't need an Expression, you just need a Reference Text component in the Structure Label Style.

 

 

 

Reference Text.png

 

And then pick select Profile.

 

Profile Reference.png

 

When you place the label, it will prompt you to select the profile for this reference.

 

Tim

 



Tim Corey
MicroCAD Training and Consulting, Inc.
Redding, CA
Autodesk Gold Reseller

New knowledge is the most valuable commodity on earth. -- Kurt Vonnegut
Message 3 of 10
manrajankalimuthu
in reply to: tcorey

i followed ur instruction. i try to shown profile elevation. But i could not get value. 

Message 4 of 10

Select the label, go into your AutoCAD properties, and select a reference profile.

Brian J. Hailey, P.E.



GEI Consultants
My Civil 3D Blog

Message 5 of 10

I think the structure would also have to refer to the alignment of said profile
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People)

HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win10 OS
Message 6 of 10

i am already set strucuture refence alignment. But, how to get relavant station profile elevation..

 

Message 7 of 10

autocad property?? what is that? Are you mean structure reference alignment.
Message 8 of 10
Jeff_M
in reply to: manrajankalimuthu

When you add a label for the structure, as long as the label style has the refence text for a profile included, you will be prompted to select the profile to reference. You can always go back and change or set it in the Properties Palette. 

8-3-2013 2-26-09 PM.png

Jeff_M, also a frequent Swamper
EESignature
Message 9 of 10

It is ok.how to add reference profile elevation into structure table column.
Message 10 of 10

Thank you

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report