AutoCAD Civil 3D General Discussion

Reply
Distinguished Contributor
nostupidquestions
Posts: 451
Registered: ‎11-17-2005
Message 1 of 7 (138 Views)

hatch pattern issue (pattern to solid)

138 Views, 6 Replies
02-27-2014 07:52 AM

i've got a hatch pattern that is the DOT pattern for existing asphalt. it's annotative because i have 2 viewports, one at 20 scale and a detail at 5 scale. for some reason it randomly turns solid in the 5 scale viewport. am i missing something about annotative hatch patterns?

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2015
*Expert Elite*
Jay_B
Posts: 2,135
Registered: ‎09-15-2010
Message 2 of 7 (131 Views)

Re: hatch pattern issue (pattern to solid)

02-27-2014 08:08 AM in reply to: nostupidquestions

Are "Annoallvisible" and "Annoautoscale" both turned on on lower right of screen?

 

Is it actually being switched to Solid hatch pattern or is it a scale density issue?

Jay

C3D 2014 SP2
Win 7 Professional 64 Bit
Distinguished Contributor
nostupidquestions
Posts: 451
Registered: ‎11-17-2005
Message 3 of 7 (128 Views)

Re: hatch pattern issue (pattern to solid)

02-27-2014 08:10 AM in reply to: Jay_B

it still says it a dot pattern, just showing up solid. this morning it was working fine. both of those toggles are on.

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2015
Distinguished Contributor
nostupidquestions
Posts: 451
Registered: ‎11-17-2005
Message 4 of 7 (121 Views)

Re: hatch pattern issue (pattern to solid)

02-27-2014 08:24 AM in reply to: nostupidquestions

there are actually two 5 scale viewports. one is dots and the other is solid. frustrating.

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2015
Distinguished Mentor
JoAnn_Hogan
Posts: 527
Registered: ‎06-25-2012
Message 5 of 7 (113 Views)

Re: hatch pattern issue (pattern to solid)

02-27-2014 08:50 AM in reply to: nostupidquestions

Would you mind sharing your drawing so we could have a look at the issue

Please let me know if this helps
Jo (P.S follow me on twitter @JoAnn_Hogan)

If this post solved your issue please mark as solved and Kudos are always welcome =)

AutoCAD Certified Professional 2014 / Inventor Certified Professional 2014
*Expert Elite*
Jay_B
Posts: 2,135
Registered: ‎09-15-2010
Message 6 of 7 (107 Views)

Re: hatch pattern issue (pattern to solid)

02-27-2014 09:03 AM in reply to: nostupidquestions

nostupidquestions wrote:

there are actually two 5 scale viewports. one is dots and the other is solid. frustrating.


Hmm, Try using the "Match Properties" command. Select the edge of the good 5 scale VP then the Bad one.

Jay

C3D 2014 SP2
Win 7 Professional 64 Bit
Distinguished Contributor
nostupidquestions
Posts: 451
Registered: ‎11-17-2005
Message 7 of 7 (81 Views)

Re: hatch pattern issue (pattern to solid)

02-27-2014 11:29 AM in reply to: Jay_B

it's working correctly now. don't know what i did. thanks though.

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2015

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs