AutoCAD Civil 3D General Discussion

Reply
*Expert Elite*
sboon
Posts: 2,072
Registered: ‎11-08-2005
Message 11 of 39 (634 Views)

Re: direct point inverse - rant

01-17-2012 02:30 PM in reply to: TerryDotson

Both 2D and 3D distances would be useful.  Also vertical difference, and slope or grade between points.

 

I would prefer to see the inverse reported in Azimuths, instead of by quadrant bearings.

 

Thanks Terry.

Valued Mentor
TerryDotson
Posts: 482
Registered: ‎06-06-2010
Message 12 of 39 (619 Views)

Re: direct point inverse - rant

01-18-2012 08:06 AM in reply to: sboon

Okay, all that has been added, download the ZIP again and update your VLX.

 

IMPORTANT: This routine has not undergone thorough testing and could report incorrect results.  It is simply something we put together quickly for freeware to address the requested problem, it is not based on our time tested MapWorks code.  As such you should scrutinize it's results !!!

Valued Mentor
TerryDotson
Posts: 482
Registered: ‎06-06-2010
Message 13 of 39 (589 Views)

Re: direct point inverse - rant

01-18-2012 03:31 PM in reply to: sboon

Toshiba Qosmio X505-Q890

 

By the way, I have that same notebook as a test machine.  Very nice but the glossy surface is a fingerprint magnet that drives me insane.

*Expert Elite*
Sinc
Posts: 6,207
Registered: ‎11-18-2006
Message 14 of 39 (575 Views)

Re: direct point inverse - rant

01-18-2012 11:40 PM in reply to: sboon

SBoon wrote:

Both 2D and 3D distances would be useful.  Also vertical difference, and slope or grade between points.

 

I would prefer to see the inverse reported in Azimuths, instead of by quadrant bearings.



Spoken like a Sincpac-C3D user...

 

I *think* the PTINV command will display azimuths, if that's how the drawing settings are set, but I need to go back and verify.  If not, they'll do that in the next release.  It already does both 2D and 3D distances, along with slope and grade, as well as incorporating the ability to include "running totals".  We've also now incorporated an OSNAPZ toggle in the Status Bar, which Autodesk inexplicably removed after the 2008 (or maybe 2007) release.

 

Jeff, Christopher, and I all actually USE Civil 3D in real work, so we understand how important these things can be.  The big question is "What's going on at Autodesk?"  Why do they keep doing things that make life so difficult for C3D users?

Sinc
Contributor
kettledrum
Posts: 13
Registered: ‎02-24-2011
Message 15 of 39 (538 Views)

Re: direct point inverse - rant

01-31-2012 11:34 AM in reply to: TerryDotson

This is a great tool and a godsend.  This is much easier than the solutions available in vanilla C3D.  Thanks!

*Expert Elite*
jmayo
Posts: 2,740
Registered: ‎11-13-2006
Message 16 of 39 (518 Views)

Re: direct point inverse - rant

01-31-2012 01:19 PM in reply to: TerryDotson

Thanks Terry!

John Mayo, PE
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
Contributor
jtroutt
Posts: 21
Registered: ‎01-11-2012
Message 17 of 39 (496 Views)

Re: direct point inverse - rant

02-01-2012 05:31 AM in reply to: TerryDotson

Thanks Terry.  I agree w/Kettledrum.  This program is great and works much better.  Thanks to all for listening.

 

Member
dnicholson
Posts: 5
Registered: ‎03-25-2013
Message 18 of 39 (371 Views)

Re: direct point inverse - rant

04-15-2013 10:21 AM in reply to: sboon

It is completely ridiculous that you would have to acquire a freeware routine for such a simple cogo task that Civil 3D should do anyways. Boo on Autodesk. I just purchased C3D through my company and after a few months of the honeymoon with it my production is WAY WICKED down. All the vendors do a great job of pumping it up because they have to. It stinks. I have a long list of all the "it used to do that" 

Windows 7 Professional SP1
intel CORE i5 vPro i5-3320M 2.60 GHz, 4.00 GB RAM
Civil 3D 2013
*Expert Elite*
troma
Posts: 2,519
Registered: ‎05-21-2008
Message 19 of 39 (367 Views)

Re: direct point inverse - rant

04-15-2013 10:35 AM in reply to: dnicholson
What program were you using previously?


Credit where credit is due! Give kudos or accept as solution whenever you can.

Member
dnicholson
Posts: 5
Registered: ‎03-25-2013
Message 20 of 39 (358 Views)

Re: direct point inverse - rant

04-15-2013 11:16 AM in reply to: troma

LDC2009. Now C3D 2013. I have been using this product since its inception. DCA, Softdesk, LDT, Civil 3D. Autodesk weaves in and out of profiling this software secifically for site development. Autodesk should note that the majority of it's users are not in the subdivision business. I think they are trying too hard to compete with microstation instead of giving its customers what they need and want.

Windows 7 Professional SP1
intel CORE i5 vPro i5-3320M 2.60 GHz, 4.00 GB RAM
Civil 3D 2013

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs