Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I can't delete, explode or edit my grading. Everytime I try, I get a fata error. I have a grading object that I need to raise 3' but I can't raise it without getting a fatal error. I can't delete it and start over either. Anybody got any suggestions?
Make sure Audit runs clean.
Make sure you use the Grading Delete tool, not the Autocad Erase tool or the
Delete button.
If you have gradings that are daisy chained (one built on another) delete
the downstream gradings first.
Turn off automatic surface creation.
Sometimes you just have to restore a backup and start from there.
One more thing that may be a problem..if you raise it 3 feet you may be
causing the grading to overlap itself which can cause crashing. Try raising
it in smaller increments and watch for the grading to overlap. If it does,
adjust the slope criteria to prevent that from happening.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")