Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I am trying to create an assembly for the attached x-section. I am having some problems though finding the cut fill slope that will work best for the multiple slopes (3:1 to 2:1). I have been trying to get the daylightgeneral to work, but I'm not sure if that's the right one or not. Can anyone help out?
What seems to be the issue with DaylighGeneral, that seems to be the most logical one to use as it will allow for multiple cut slopes defined by width.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")