alignment label style

[Anonymous]

I set up an ALS to layout barrels for MPT plans by
using a block offset left and right at a specific distance. it works great for
that scale since the block size & offset values are dependant on the
scale.

I can always make copies of the style for various
scales, but was wondering if someone has another approach?

face=Arial size=2>

--
Thanks, Joe

Joseph D. Bouza, P.E.
Civil 3D 2008
LDT 2008
Win XP pro
v 2002,
sp 2
hp workstation xw4600
Intel Core Duo CPU
E7200 @2.53 GHz
3 GB
RAM
NIVDIA Quadro FX 1700 (512MB)

The mantra of a former Flamer:

If you are forced to eat an Elephant, don’t complain about it; Take one
bite at a time.

*****************************************************************************************
In
memory of the King of Work-arounds
"The only Constant is Change".

"The only thing worse than training your staff, and having them leave is
-
not training your staff, and having them stay." 😮
A reminder taken
from Graphics Solution Providers' Calendar
page
*****************************************************************************************

[Civil3DReminders_com]

Not in 2008, but in 2009 you can use an expression to adjust to the scale of the drawing. There's a blog post somewhere that explains it, I just can't find it right now. Doesn't do you much good though, since you are using 2008.





Christopher

http://blog.civil3dreminders.com/

http://style.civil3dreminders.com/

[Anonymous]

href="http://blog.civil3dreminders.com/2008/03/drawing-conversion-scale-example.html">http://blog.c...

href="http://discussion.autodesk.com/forums/thread.jspa?threadID=682964">http://discussion.autodesk...

I would love to know if this would work with
profile view labels to label the horizontal & vertical vp scales so I can
have a 30 scale plan with a profile VP scaled 10 H, 2V or
similar.

--
John Mayo, PE
Project Engineer
Conklin
Associates
Ramsey, NJ

Civil 3D 2008 SP2, LDT 2008 SP2, Raster Design 2008
P-IV at 3.5 GHz
2
GB Ram
Nvidea Quadro FX w/ 128 MB Ram

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

<Christopher-F> wrote in message
href="news:6075869@discussion.autodesk.com">news:6075869@discussion.autodesk.com...

Not in 2008, but in 2009 you can use an expression to adjust to the
scale of the drawing. There's a blog post somewhere that explains it, I just
can't find it right now. Doesn't do you much good though, since you are using
2008.





Christopher

http://blog.civil3dreminders.com/


href="http://style.civil3dreminders.com/">http://style.civil3dreminders.com/