AutoCAD Civil 3D General

Reply
Active Contributor
Posts: 28
Registered: ‎10-01-2003
Message 1 of 6 (183 Views)

Xref Label Alignments

183 Views, 5 Replies
04-29-2013 09:31 AM

Hi there Civil 3d users,

 

I am currently trying to xref a Civil 3d files into auto cad 2d. So far on the model space it works fine however when i try to put it into paper space the labels on the profiles just seems to go crazy. See the attached picture. (First picture where the label are not displaying correctly in paper space and second drawing in model space of the same drawing which shows the labels correctly).

 

I beleive its the annotation that civil 3d uses to generate these text labels but i am unaware of how this can be solved. I would greatly appreciate if someone could shed light on this.


 

*Expert Elite*
Jeff_M
Posts: 3,950
Registered: ‎07-22-2003
Message 2 of 6 (153 Views)

Re: Xref Label Alignments

04-29-2013 11:21 AM in reply to: karen.woodward

Set the scale in the Viewport to your desired scale, regen.

Jeff_M, also a frequent Swamper
Active Contributor
Posts: 28
Registered: ‎10-01-2003
Message 3 of 6 (120 Views)

Re: Xref Label Alignments

04-30-2013 03:29 AM in reply to: Jeff_M

Jeff,

 

Thanks for the reply, i wish it was that simple. I should have mentioned this before on the post>I have tried this method and it is not working

 

Any other ideas. :smileyhappy:

*Expert Elite*
Jay_B
Posts: 1,884
Registered: ‎09-15-2010
Message 4 of 6 (115 Views)

Re: Xref Label Alignments

04-30-2013 04:48 AM in reply to: karen.woodward

What is the MS scale of the Xref?

What is the VP scale set to?

Have you verified the various Annotative system variables are properly set?

Do the drawing Units match in each dwg?

Jay

C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
Active Contributor
Posts: 28
Registered: ‎10-01-2003
Message 5 of 6 (109 Views)

Re: Xref Label Alignments

04-30-2013 05:08 AM in reply to: Jay_B

Thanks for the reply, Jay ,

 

Not quite sure of some of the things you have mentioned. I guess it is pretty basic but shedding some ligght on this would be greatly appreciated.

 

What is the MS scale of the Xref?  Again not sure why would this be of any help. As i beleive I am just setting up the scale in VP not model space, Please correct me if I am wrong.

What is the VP scale set to? VP scale is set to 1:500

 

Have you verified the various Annotative system variables are properly set? Not sure what you mean by this. How can i do this.

 

Do the drawing Units match in each dwg? Yes

*Expert Elite*
Posts: 2,501
Registered: ‎05-21-2008
Message 6 of 6 (95 Views)

Re: Xref Label Alignments

04-30-2013 05:52 AM in reply to: karen.woodward

Units here need to match your paperspace units:

plot.png


Credit where credit is due! Give kudos or accept as solution whenever you can.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs