AutoCAD Civil 3D General Discussion

Reply
Contributor
millsy.g
Posts: 14
Registered: ‎11-15-2012
Message 1 of 5 (450 Views)

Viewport scale screwed up until switching back and forth from model view

450 Views, 4 Replies
03-17-2013 01:17 PM

So this problem has not been limited to myself (I am attending school in Calgary, and we had a Civil3d course) 

 

I am trying to get a custom 1:3000 scale for a profile in a viewport, and currently, everytime I swap to the different scale in the viewport properties, the whole model view is displayed with all the annotative text being a jumble.

 

It has done this before for other scales like 1:1000 or 1:2500, but usually switching to the model tab and back to the whatever tab the viewport is in fixes it. (eventually, sometimes it takes multiple tries)

 

This case it doesn't seem to want to work at all, and has crashed autocad a couple of times after switching scales.

 

any ideas?

*Expert Elite*
BrianHailey
Posts: 2,749
Registered: ‎04-27-2005
Message 2 of 5 (437 Views)

Re: Viewport scale screwed up until switching back and forth from model view

03-17-2013 04:03 PM in reply to: millsy.g

Don't use the properties to change your viewport scale as that only changes the viewport scale, use the scale pulldown at the bottom of the screen because that will change both the viewport scale as well as the annotative scale. After changing the scale, you might need to do a REGENALL to get the C3D annotation to look correct.

*Expert Elite*
troma
Posts: 2,519
Registered: ‎05-21-2008
Message 3 of 5 (413 Views)

Re: Viewport scale screwed up until switching back and forth from model view

03-18-2013 06:49 AM in reply to: BrianHailey

If you use the 'Annotative Scale' in the properties box, it also sets the 'Viewport Scale'.

 

If you're having problems crashing while doing this, I suggest turning the viewport off first.  Set the scale, lock the viewport, save.  Then turn on the viewport, and regenall.


Credit where credit is due! Give kudos or accept as solution whenever you can.

Contributor
millsy.g
Posts: 14
Registered: ‎11-15-2012
Message 4 of 5 (406 Views)

Re: Viewport scale screwed up until switching back and forth from model view

03-18-2013 08:10 AM in reply to: troma

The crashing problem just seems to be due to the laptop no longer being able to handle the size of the project. Everytime I make any change, it takes about 2-3 minutes to think about what I've done.

 

As for the annotation scale, changing the selection to 'sync' the annotation scale and paper scale does seem to work. Though it still takes a couple of times of switching scales before it actually takes hold..

Distinguished Contributor
annw2
Posts: 1,263
Registered: ‎03-07-2006
Message 5 of 5 (355 Views)

Re: Viewport scale screwed up until switching back and forth from model view

04-10-2013 08:17 AM in reply to: millsy.g

I am getting a problem of the profile view scale reading the drawing setting scale and NOT the viewport scale.

 

2012

 

Has anyone run into this problem and how to fix it?

Ann Wingert, P.E.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs