AutoCAD Civil 3D General

Reply
*Expert Elite*
rkmcswain
Posts: 2,586
Registered: ‎11-13-2006
Message 1 of 1 (155 Views)

View frames not centered on alignment?

155 Views, 0 Replies
06-11-2010 08:53 AM

When creating view frames, the default is to center the view frame on the alignment (meaning that an equal amount of plan view is shown above and below the alignment)

 

Is there any way to offset the placement of the view frames because our alignment is not in the center of the area that needs to be shown in plan view. In fact it's at one extreme edge, so about 10% of the plan view is LEFT of the alignment and the remaining 90% is RIGHT of the alignment.

 

I see that you can grip edit the "AeccGripViewFrameCenter" grip and move the entire frame, one at a time, but what about moving all 50 or 100 (or whatever #) view frames an equal amount? Stands to reason that "vertical offset" might be a property listed for a View Frame....

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs