AutoCAD Civil 3D General Discussion

Reply
Member
ENGTECH15
Posts: 4
Registered: ‎01-15-2013
Message 1 of 3 (256 Views)
Accepted Solution

UCS ICON

256 Views, 2 Replies
01-15-2013 06:43 AM

I am currently working on a culvert drawing, using two view ports for my plan and profile sheet. As you can see below in my attachment, the UCS icon in the upper viewport is distorted, I do not how this occured nor do I know how to correct it. Would appreciate some input. Thanks 

*Expert Elite*
AllenJessup
Posts: 5,817
Registered: ‎05-21-2003
Message 2 of 3 (251 Views)

Re: UCS ICON

01-15-2013 06:50 AM in reply to: ENGTECH15

With no information other than the screen shot. I would guess that your Viewtwist is not 0°. Type VIEWTWIST to check. Use the DView command to reset.

 

It isn't a bad thing if it's not 0°. Mine often isn't. That's how I make a road that isn't east to west be parallel to the boarder.

*Expert Elite*
mathewk
Posts: 2,720
Registered: ‎07-09-2003
Message 3 of 3 (237 Views)

Re: UCS ICON

01-15-2013 07:22 AM in reply to: ENGTECH15
UCS with the View option will rotate the UCS to your viewport.
Matt Kolberg
Cansel - Autodesk Division
http://www.cansel.ca/

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs