Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I had 4 data sets for a whole bunch of pipe networks for a submittal. After
the submittal, we started over on our design. I "dragged" all my styles and
parts lists into said new drawing. All text seems to be displaying at
40-scale, but I need 20-scale as per the previous drawings that the styles
were originally created in.
Maybe try changing your scale through your TOOLSPACE / SETTINGS/ R-Click drawing name and then EDIT DRAWING SETTING / then here you'll be able to change your Scale setting from 40 to 20 scale; all your dynamic text will change accordingly.
I'm not following you here. Are you talking about setting the dimscale? or
about a pageset for plotting to 20-scale? I know in LDD there was a drawing
setup menu, but I haven't yet found it in C3D...maybe that's what I'm
missing?
wrote in message news:5515788@discussion.autodesk.com...
Have you changed the drawing scale to 20?
--
James Wedding, P.E.
Engineered Efficiency, Inc.
Civil 3D 2007
XP Tablet, SP2, 2GHz, 2G
www.eng-eff.com
www.civil3d.com
Thanks. I had forgotten where C3D hid the drawings settings menus.
wrote in message news:5515825@discussion.autodesk.com...
Maybe try changing your scale through your TOOLSPACE / SETTINGS/ R-Click
drawing name and then EDIT DRAWING SETTING / then here you'll be able to
change your Scale setting from 40 to 20 scale; all your dynamic text will
change accordingly.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")