Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Templates not showing up on sections

8 REPLIES 8
Reply
Message 1 of 9
Ash254
337 Views, 8 Replies

Templates not showing up on sections

How do i get templates which I have created, to show on the sections, when the sample lines were not drawn perpendicular to the alignment.

I am getting the template to show only at those sections which are perpendicular to the alignment.

8 REPLIES 8
Message 2 of 9
ccookusi
in reply to: Ash254

What version of Civil 3D are you using?

 

Windows 10 Pro x64
Civil 3D 2018
Dell Precision 7720
i7 7700HQ
NVIDIA Quadro P3000
NVMe Samsung SSD 960 Boot
16 GB Ram
Message 3 of 9
Ash254
in reply to: ccookusi

Civil 2011

Message 4 of 9
ccookusi
in reply to: Ash254

You need to be using 2012 or 2013 to accomplish that..

 

Windows 10 Pro x64
Civil 3D 2018
Dell Precision 7720
i7 7700HQ
NVIDIA Quadro P3000
NVMe Samsung SSD 960 Boot
16 GB Ram
Message 5 of 9
Ash254
in reply to: ccookusi

bummer!!!!

thank you very much

Message 6 of 9
Ash254
in reply to: Ash254

hey ccookusi

i would try it tomorrow in 2012, but if you can tell me how to go about doing that i would very much appreciate it.

Message 7 of 9
ccookusi
in reply to: Ash254

You shouldn't have to do anything.

Just call it up in 2012 and you should see the interpolated corridor in those sections.

 

Windows 10 Pro x64
Civil 3D 2018
Dell Precision 7720
i7 7700HQ
NVIDIA Quadro P3000
NVMe Samsung SSD 960 Boot
16 GB Ram
Message 8 of 9
Ash254
in reply to: ccookusi

i tried doing it in c3d2012 but that did not wk. 

Thnak you for the help though

Message 9 of 9
John_v1
in reply to: Ash254

1) Create a corridor surface

2) create the sample lines  ( you should do the sampling for corridor surface) and you can roate them to required angle

3) create the sections. 

 

 

attached image

 

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report