How do i get templates which I have created, to show on the sections, when the sample lines were not drawn perpendicular to the alignment.
I am getting the template to show only at those sections which are perpendicular to the alignment.
What version of Civil 3D are you using?
You need to be using 2012 or 2013 to accomplish that..
You shouldn't have to do anything.
Just call it up in 2012 and you should see the interpolated corridor in those sections.
1) Create a corridor surface
2) create the sample lines ( you should do the sampling for corridor surface) and you can roate them to required angle
3) create the sections.
attached image