AutoCAD Civil 3D General

Distinguished Contributor
Posts: 115
Registered: ‎02-24-2009
Message 1 of 2 (228 Views)
Accepted Solution

Super Elevation and Horizontal Transitions

228 Views, 1 Replies
02-14-2013 10:45 AM

I need some help with getting a roadway to transition horizontally for a turn lane. If it were straight without super, it would be easy. However, the transition happens in a curve that needs to be super elevated.


I know I can use the lane transition assembly and set it to "change offset and grade" but with that, I would have to manually calc my EOP elevations.


Is there a sub assembly with the ability to use the centerline super elevation data as well as transistion horizontally? Any other ideas?


Using C3D 09



-Tucker McKenzie

Distinguished Contributor
Posts: 115
Registered: ‎02-24-2009
Message 2 of 2 (224 Views)

Re: Super Elevation and Horizontal Transitions

02-14-2013 11:05 AM in reply to: t_mckenzie

Sorry, should have checked the subassembly catlog. There is a super elevation with varying width in there. Our standards has a tool pallette that has paired down some of the additional sub assemblies, and it wasn't in there.


Anyways ... sorry and thanks!



You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D