i'd try to create my own subassembly using three methods which is by creating subassembly from polyline, using generic palette from tool palettes and by using subassembly composer. But all these three, i still cant successfully created it.
I would like to ask which one is the best and easiest method to create subassembly.
I found myself it it easier to use subassembly composer and i'd imported it into civil 3D with no error. But then, when i try to create a corridor with that subassembly i've created, i got this error message..."One or more subassembly .Net classes could not be found. Check Event Viewer for more information. Continue?" When i click Yes, the error message still have and i cant use that subassembly yet.
To Matt Kolberg,
Thanks for the reply...i wish i can attach the file and you may see the error by yourself. Unfortunately i cant do so because it was restricted. I'd try all these three methods to create my SA, but it wont success at all by those three.
A little more information is needed:
1. What version of Subassembly Composer are you using (There are 3 versions out there) and you need to make sure you are using the one on the Subscription Center.
2. What version of Civil 3D are you using?
3. Was the SAC on the same machine as you are trying to build the corridor on?
OK, three more questions:
1. Are you using the English version of Civil 3D or another one?
2. Are there four files in the Civil 3D 2011 directory that are named "Subassembly.------.dll"
3. What OS are you using?
I seem to have a similar problem; I just installed the sub assembly composer. but don't know how or from where I can launch the application and run the work flow. when I go to "all programs" and look inside my Autodesk , I cannot find any icon for the "subassmbly composer":
I am using a 64 bit win7, civil 3d 2011, english , and seem to have the following 4 files:
C:\Program Files\Autodesk\AutoCAD Civil 3D 2011\
Any hint would be appreciated.
On my install it is up one level from what you are showing. Those four files are for the sub assembly run time and aren't for the Composer.
I am having same issue:
1. Autocad Civil 3D 2012
3. Win 7
Worked in 2011 when I first created it but just now tried to bring into Tool Palette and got message:
[Subassembly.C_5x2_Channel].Net subassembly project, module, or class not found [C;\ProgramData\Autodesk\C3D 2012\enu\Imported Tools\5'X2' CHANNEL\0fa1091414814b569595a1338fa36c73.dll!Subas
After clicking ok get the following twice:
[Subassembly.C_5x2_Channel].Net subassembly project, module, or class not found (Source: )
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.