AutoCAD Civil 3D General Discussion

Reply
Contributor
martin.folber
Posts: 25
Registered: ‎12-25-2010
Message 1 of 12 (1,018 Views)
Accepted Solution

Subassembly Composer - Stripping surface tool

1018 Views, 11 Replies
11-09-2012 01:02 AM

Hi,

we are missing tool in SAC  for stripping a surface exactly the same way how Stripping Pavement or Striping TopSoil works. There is no tool to copy and vertical offset part of the surface. I found out some workaround with Point Delta X on Surface and then vertical Offset, but this is very complicated and I am not able to follow each peak of the surface. Do you have any effective idea? Surface link is not suitable for Topsoil stripping.

 

Thanks

Martin

Contributor
kiyabole
Posts: 23
Registered: ‎07-22-2012
Message 2 of 12 (1,015 Views)

Re: Subassembly Composer - Stripping surface tool

11-09-2012 01:42 AM in reply to: martin.folber

exactly wt kind of strriping do u want? could u elaborate?

Kiya Chemeda
Civil 3D 2013
HP Pavilion dv6 cor i7
16GB RAM
windows 8
Contributor
martin.folber
Posts: 25
Registered: ‎12-25-2010
Message 3 of 12 (1,012 Views)

Re: Subassembly Composer - Stripping surface tool

11-09-2012 01:58 AM in reply to: kiyabole

I need several topsoil strippings integrated in my own subassembly.

thanks

*Expert Elite*
KMercier_C3D
Posts: 241
Registered: ‎12-14-2010
Message 4 of 12 (999 Views)

Re: Subassembly Composer - Stripping surface tool

11-09-2012 05:07 AM in reply to: martin.folber

Why do you say that a Surface Link is not suitable for topsoil stripping?

 

A Surface Link allows you to pick the surface to follow, define a starting X and an ending X (along with the ability to reference offset targets), and then select what the vertical offset from the surface is that you define.

 

Is this not what topsoil stripping would need? If not maybe you can provide a sketch of what you are looking for?

Kati Mercier, P.E.

Co-author of "Mastering AutoCAD Civil 3D 2013"
AutoCAD Civil 3D 2013 Certified Professional and AutoCAD 2013 Certified Professional
AU2012 Speaker::: CI3001: Reverse Engineering with Subassembly Composer for AutoCAD Civil 3D
AU2011 Speaker::: CI4252: Create Subassemblies That Think Outside the Box With Subassembly Composer for AutoCAD® Civil 3D®
Contributor
martin.folber
Posts: 25
Registered: ‎12-25-2010
Message 5 of 12 (991 Views)

Re: Subassembly Composer - Stripping surface tool

11-09-2012 05:41 AM in reply to: KMercier_C3D

Hi Kati,

here it is, what we need...Stripping.png

Employee
peterfunkautodesk
Posts: 708
Registered: ‎08-25-2009
Message 6 of 12 (987 Views)

Re: Subassembly Composer - Stripping surface tool

11-09-2012 06:20 AM in reply to: martin.folber

As Kati pointed out, that is exaclty what the surface link was designed to do. It will follow a surface between two points and with an optional vertical offset.

 

Peter Funk

Autodesk, Inc.



Peter Funk
Autodesk, Inc.

Contributor
martin.folber
Posts: 25
Registered: ‎12-25-2010
Message 7 of 12 (968 Views)

Re: Subassembly Composer - Stripping surface tool

11-09-2012 11:43 AM in reply to: peterfunkautodesk

Thanks Peter and Kati,

I made a fool of myself little bit... Maybe the picture in SAC help should be more illustrative. It is not clear, if there is one link (segment) or more segments of stripped surface.

 

Martin

*Expert Elite*
KMercier_C3D
Posts: 241
Registered: ‎12-14-2010
Message 8 of 12 (965 Views)

Re: Subassembly Composer - Stripping surface tool

11-09-2012 11:52 AM in reply to: martin.folber

Here is a subassembly that has one "Surface Link", it segments it to match the surface. Hopefully this visual helps. (The far left side has a separate link for a slope to surface.)

 

11-9-2012 2-51-58 PM.jpg

Kati Mercier, P.E.

Co-author of "Mastering AutoCAD Civil 3D 2013"
AutoCAD Civil 3D 2013 Certified Professional and AutoCAD 2013 Certified Professional
AU2012 Speaker::: CI3001: Reverse Engineering with Subassembly Composer for AutoCAD Civil 3D
AU2011 Speaker::: CI4252: Create Subassemblies That Think Outside the Box With Subassembly Composer for AutoCAD® Civil 3D®
Contributor
martin.folber
Posts: 25
Registered: ‎12-25-2010
Message 9 of 12 (960 Views)

Re: Subassembly Composer - Stripping surface tool

11-09-2012 11:56 AM in reply to: KMercier_C3D

Thanks Kati, this is quite clear example and good tip how to "close" the stripping.

Martin:smileyhappy:

*Expert Elite*
LeafRiders
Posts: 315
Registered: ‎09-28-2010
Message 10 of 12 (843 Views)

Re: Subassembly Composer - Stripping surface tool

11-26-2012 05:47 PM in reply to: martin.folber

Since it's already built, and it's so simple would someone like to post it in 2012 version?

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs