AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
evanhughes
Posts: 60
Registered: ‎11-03-2005
Message 1 of 5 (232 Views)

Sub assemblies not displaying

232 Views, 4 Replies
08-02-2013 01:34 PM
Hi all

I have Civil 3d UKIE. Since the installation of service pack 2 the British std kerb appears on the screen as 2circles approximately 2 meters apart.

Any ideas on the cause.

Regards
Evan
*Expert Elite*
tcorey
Posts: 2,482
Registered: ‎12-18-2002
Message 2 of 5 (203 Views)

Re: Sub assemblies not displaying

08-03-2013 09:50 AM in reply to: evanhughes

Check the properties of the subassembly and be sure Omit Link is False.

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
New Member
niallmiz1
Posts: 2
Registered: ‎05-15-2014
Message 3 of 5 (80 Views)

Re: Sub assemblies not displaying

05-15-2014 02:06 AM in reply to: tcorey

Hi,

 

I am having the same issue with british kerbs sub assembly from UKIE, two red circles appearing in their place. And I can't seem to find any option for 'omit link' in the properties tab. Please can you point me in the right direction?

 

Thanks, 

Niall

Contributor
craig.robertson
Posts: 21
Registered: ‎02-12-2014
Message 4 of 5 (72 Views)

Re: Sub assemblies not displaying

05-15-2014 03:37 AM in reply to: niallmiz1

Niall select the subassembly, right click and go to subassembly properties go along to parameters tab and omit link is the last option selected in the image attached.

omit link.JPG

New Member
niallmiz1
Posts: 2
Registered: ‎05-15-2014
Message 5 of 5 (66 Views)

Re: Sub assemblies not displaying

05-15-2014 04:37 AM in reply to: craig.robertson

Hi Craig,

 

Unfortunately, in my properties section this is what I'm faced with (see attachment). If it helps, I never had this issue until I installed service pack 2 a couple months ago! Maybe the file path/source is wrong but I don't know how to change it.

 

 

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs