AutoCAD Civil 3D General

Reply
Active Member
Posts: 6
Registered: ‎11-05-2012
Message 1 of 5 (203 Views)
Accepted Solution

Station Label Offest

203 Views, 4 Replies
11-05-2012 11:40 AM

New to civil 3d...I have a series of bore locations along an alignment that I need the station offset and distance. I tried POINT -> ALIGNMENT: STATION/OFFSET, and that prompts me to tell where i want the offsets to go. I want to be able to pick the center of each bore and have civil 3d tell me that information. What command do I use? Help

 

Thanks

*Expert Elite*
Posts: 2,501
Registered: ‎05-21-2008
Message 2 of 5 (189 Views)

Re: Station Label Offest

11-05-2012 12:50 PM in reply to: southpawj05

You should get this data just by hovering the mouse over the point.

 

If that's not accurate enough or stable enough, ADD LABELS, go to Alignment Labels, Station Offset.

I would use the Fixed Point option.


Credit where credit is due! Give kudos or accept as solution whenever you can.

*Expert Elite*
tcorey
Posts: 2,315
Registered: ‎12-18-2002
Message 3 of 5 (180 Views)

Re: Station Label Offest

11-05-2012 01:13 PM in reply to: southpawj05

You're saying you don't want to label it, you want to query for the information?

 

Go to the Analyze tab of the Ribbon, find the Inquiry panel and select the InquiryTool button.

 

In the dialog, pick Inquiry type Alignment --> Alignment Station and Offset at Point. This will let you pick the locations of the existing points, one at a time.

 

If you want a report on a group of points instead of selecting locations one-at-a-time, go to the Toolbox tab of the Toolspace, expand Reports Manager --> Points --> Station Offset to Points.

 

Tim

 

 

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
Active Member
Posts: 6
Registered: ‎11-05-2012
Message 4 of 5 (175 Views)

Re: Station Label Offest

11-05-2012 01:23 PM in reply to: troma

Troma,

 

That worked!!!! its exactly what I needed. Thanks for your input.

*Expert Elite*
Posts: 2,501
Registered: ‎05-21-2008
Message 5 of 5 (158 Views)

Re: Station Label Offest

11-06-2012 06:04 AM in reply to: southpawj05

You're welcome.

I come here to ask questions when I'm in a pickle, so I try to spread the wealth a bit while I'm here.


Credit where credit is due! Give kudos or accept as solution whenever you can.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs