AutoCAD Civil 3D General

Active Contributor
Posts: 42
Registered: ‎07-29-2008
Message 1 of 2 (110 Views)

Site Plan Issue......

110 Views, 1 Replies
11-06-2012 07:02 AM

I have been supplied a site plan in TN83F which I am also working in. When I bring the .dwg into my project it comes in the wrong spot. I have spoken with the CAD operator and maintains that it is correct. What is the best way for me to fix this issue on my end of things. The site plan is oriented correctly, it just comes in a mile or so off from the location.

*Expert Elite*
Posts: 2,108
Registered: ‎09-04-2006
Message 2 of 2 (107 Views)

Re: Site Plan Issue......

11-06-2012 07:10 AM in reply to: jreed

Obviously something is not correct. The first thing I would do is determine if the drawing is correct. One way to do so is to compare the coordinates of a point in the drawing with a geodetically correct source. You can use any public GIS map such as a local gov't resource or Google Maps, etc.


If it is correct then you should verify that your sources are correct. One or the other has to be wrong.

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D