Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Showing in plan points from assembly/corridor ?

1 REPLY 1
Reply
Message 1 of 2
cyberflow
191 Views, 1 Reply

Showing in plan points from assembly/corridor ?

Hi there Civil 3d community,

 

I've been working on a proposed ditch relocation.


I made an alignement, profile, build an assembly with it's constraints (2:1 until a certain elevation and then 3:1 to the existing ground), and made a surface from that corridor.

 

Now i wanted to know this : How do i generate a polyline with the assembly information ?

I would like to show what it does at the final.

--------------------------------------------
Using : Autodesk Civil 3D 2022& 2023
AKA Frank Freitas, Senior Roadway Designer @ Kiewit
1 REPLY 1
Message 2 of 2
cyberflow
in reply to: cyberflow

Well, i guess i didn't looked proprely before posting a question on the forum.

Here's a solution i've found :

-Select the corridor
-Go to the ribbon @ the right of the Superelevation icon there's a few functions available : Click on "Launch Pad" and select "Polyline from corridor"
-Afterwards just follow your instinc (Selecting the correct layer, etc) click ok and select the polyline you want

Voila !

If there's another option feel free to share !
--------------------------------------------
Using : Autodesk Civil 3D 2022& 2023
AKA Frank Freitas, Senior Roadway Designer @ Kiewit

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report