AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Brian Hailey
Message 1 of 5 (62 Views)

Set a profile current

62 Views, 4 Replies
11-16-2004 03:17 PM
Hello all, I'm attempting to edit a layout profile by moving the pvi. All works fine until I try using the transparent command for station and elevation. It indicates that there is no station as I move my crosshairs around. It works in a different profile so I'm thinking that it should be asking me to select which profile view to use but it is not doing it. Any ideas? -- Brian Hailey LDT2005 C3D2005 XP Pro - SP 2 P4 2.8GHz 1.00 GB of RAM
*Brian Hailey
Message 2 of 5 (62 Views)

Re: Set a profile current

11-16-2004 03:20 PM in reply to: *Brian Hailey
Aha! I figured out my problem. If the previous profile view is visible, it assumes you want to reuse that view. If you pan so that view is no longer on the screen, it will prompt you to select a profile view. -- Brian Hailey LDT2005 C3D2005 XP Pro - SP 2 P4 2.8GHz 1.00 GB of RAM "Brian Hailey" wrote in message news:419a8a98$1_3@newsprd01... > Hello all, > > I'm attempting to edit a layout profile by moving the pvi. All works fine > until I try using the transparent command for station and elevation. It > indicates that there is no station as I move my crosshairs around. It > works in a different profile so I'm thinking that it should be asking me > to select which profile view to use but it is not doing it. Any ideas? > > -- > Brian Hailey > LDT2005 > C3D2005 > XP Pro - SP 2 > P4 2.8GHz > 1.00 GB of RAM > > >
*Brian Hailey
Message 3 of 5 (62 Views)

Re: Set a profile current

11-16-2004 03:27 PM in reply to: *Brian Hailey
Ok, I take that back. That didn't necessarily work. Back to my original question, any ideas? -- Brian Hailey LDT2005 C3D2005 XP Pro - SP 2 P4 2.8GHz 1.00 GB of RAM "Brian Hailey" wrote in message news:419a8b47$1_3@newsprd01... > Aha! I figured out my problem. If the previous profile view is visible, > it assumes you want to reuse that view. If you pan so that view is no > longer on the screen, it will prompt you to select a profile view. > > -- > Brian Hailey > LDT2005 > C3D2005 > XP Pro - SP 2 > P4 2.8GHz > 1.00 GB of RAM > > > "Brian Hailey" wrote in message > news:419a8a98$1_3@newsprd01... >> Hello all, >> >> I'm attempting to edit a layout profile by moving the pvi. All works >> fine until I try using the transparent command for station and elevation. >> It indicates that there is no station as I move my crosshairs around. It >> works in a different profile so I'm thinking that it should be asking me >> to select which profile view to use but it is not doing it. Any ideas? >> >> -- >> Brian Hailey >> LDT2005 >> C3D2005 >> XP Pro - SP 2 >> P4 2.8GHz >> 1.00 GB of RAM >> >> >> > >
*Robiz
Message 4 of 5 (62 Views)

Re: Set a profile current

11-17-2004 12:15 AM in reply to: *Brian Hailey
I think its bug. I got the same thing. Maris Rubenis "Brian Hailey" wrote in message news:419a8a98$1_3@newsprd01... > Hello all, > > I'm attempting to edit a layout profile by moving the pvi. All works fine > until I try using the transparent command for station and elevation. It > indicates that there is no station as I move my crosshairs around. It > works in a different profile so I'm thinking that it should be asking me > to select which profile view to use but it is not doing it. Any ideas? > > -- > Brian Hailey > LDT2005 > C3D2005 > XP Pro - SP 2 > P4 2.8GHz > 1.00 GB of RAM > > >
*Chakri Gavini
Message 5 of 5 (62 Views)

Re: Set a profile current

11-17-2004 05:28 AM in reply to: *Brian Hailey
Brain and Maris, We could track this problem during "Edit Profile..." command.. Transparent commands during edit/layout profile seems to be remembering the last profile view used, which it should not. Will be addressed ASAP. Thanks Chakri "Robiz" wrote in message news:419b08ba_2@newsprd01... > I think its bug. I got the same thing. > > Maris Rubenis > > "Brian Hailey" wrote in message > news:419a8a98$1_3@newsprd01... > > Hello all, > > > > I'm attempting to edit a layout profile by moving the pvi. All works fine > > until I try using the transparent command for station and elevation. It > > indicates that there is no station as I move my crosshairs around. It > > works in a different profile so I'm thinking that it should be asking me > > to select which profile view to use but it is not doing it. Any ideas? > > > > -- > > Brian Hailey > > LDT2005 > > C3D2005 > > XP Pro - SP 2 > > P4 2.8GHz > > 1.00 GB of RAM > > > > > > > >
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.