Is there a way to add a pattern/hatch between the bottom of the Corridor Assemblies (shapes) and the OG/EG (assuming the corridor is above the EG/OG; ie. the road is in a fill condition).
I understand how to create a pattern/hatch between two (2) profiles in a Profile View but is it possible to do it in a Section View between a profile and object (corridor)?
Solved! Go to Solution.
Solved by Jay_B. Go to Solution.
You can show a shape style in the section views based on a Total Volume materials list comparing cut/fill from EG & Datum surfaces.
See attached 2012 tutorial file.
Thanks Jay. That's what I needed.
Say, you wouldn't know if there's a way to make it so any pipes within the hatch/pattern area would show above the pattern would you? I don't want the pattern running through the cross section of the pipe. Would I have to use masking to accomplish this?
Grimes_MG wrote:Say, you wouldn't know if there's a way to make it so any pipes within the hatch/pattern area would show above the pattern would you? I don't want the pattern running through the cross section of the pipe. Would I have to use masking to accomplish this?
Glad to hear that helped.
Sorry I don't have an answer for that one. don't use the hatching in sections here.