I have been having issues with some of my Sanitary Plan and profile sheets being incredibly slow to open & plot that I am wondering if I have set them up properly. I’m wondering how others have theirs setup compared to mine. I will typically have a sanitary network & profiles as a standalone drawing attached to vault. That drawing from vault is then xref into my P&P sheets. In those sheets, I attach xrefs for horizontal linework/borders as normal. I also reference the network from vault so that I can have plan labels added from the network. Creating and editing the drawings are not really a problem, it is just opening them up or printing them through Sheet Set Manager that are the real issues. I think my issue is referencing data that is already attached to an xref, but I would still like to know how others have theirs setup.
I use a similar drawing setup excluding vault but from SSM i use acroplot to print to pdf and them print to the copier the last job was 100 A3 sheets and took about an hour to print them all to one pdf.