AutoCAD Civil 3D General

Reply
*Expert Elite*
Neilw
Posts: 2,199
Registered: ‎09-04-2006
Message 1 of 13 (239 Views)
Accepted Solution

Quantity summary across multiple dwgs

239 Views, 12 Replies
11-14-2012 01:37 PM

I'm looking for suggestions on how to compile quantities for cost estimating when the data is scattered across multiple files. Aside from generating quantities for each drawing in seperate .csv files etc., is there some way to pull the data from all the drawings at once into a single summary file?

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
http://www.sec-landmgt.com
*Expert Elite*
Joe-Bouza
Posts: 4,747
Registered: ‎12-15-2008
Message 2 of 13 (234 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 01:41 PM in reply to: Neilw

You talking QTO or simple acad?

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Neilw
Posts: 2,199
Registered: ‎09-04-2006
Message 3 of 13 (233 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 01:57 PM in reply to: Joe-Bouza

Ideally it would be with one tool but I don't think QTO can extract quantites from XREF's. I know we can use MAP report queries to extract data to .csv files but it won't work on C3D objects. There is the data extraction tool but I expect it has the same limitations.

 

I'm wondering if Infrastructure suite has tools for this or can we do it through DWF's?

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
http://www.sec-landmgt.com
*Expert Elite*
Joe-Bouza
Posts: 4,747
Registered: ‎12-15-2008
Message 4 of 13 (219 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 02:58 PM in reply to: Neilw

correct! only primitive. But I think you may be mistaken about the QTO across files? I haven;t looked at it in a while

 

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Neilw
Posts: 2,199
Registered: ‎09-04-2006
Message 5 of 13 (214 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 03:22 PM in reply to: Joe-Bouza

QTO doesn't seem to recognize anything in XREF's Joe.

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
http://www.sec-landmgt.com
*Expert Elite*
BrianHailey
Posts: 2,748
Registered: ‎04-27-2005
Message 6 of 13 (202 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 03:58 PM in reply to: Neilw

Ah, young padawan, you must try again. QTO does recognize through an xref but you must ensure the pay item file is the same in both files:

 

http://screencast.com/t/zUiHt7NjMUw6 

*Expert Elite*
Neilw
Posts: 2,199
Registered: ‎09-04-2006
Message 7 of 13 (195 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 05:10 PM in reply to: BrianHailey

Excellent. Now, how can one determine what pay item files were used on the drawings?

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
http://www.sec-landmgt.com
*Expert Elite*
Joe-Bouza
Posts: 4,747
Registered: ‎12-15-2008
Message 8 of 13 (186 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 06:02 PM in reply to: Neilw

If I had to guess more than likely there either isn't or its different. And how come I didn't get the check :smileywink:

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Neilw
Posts: 2,199
Registered: ‎09-04-2006
Message 9 of 13 (182 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 06:19 PM in reply to: Joe-Bouza

I guess you deserve some credit for thinking it was possible so here's a check (Kudo):smileywink:

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
http://www.sec-landmgt.com
*Expert Elite*
Neilw
Posts: 2,199
Registered: ‎09-04-2006
Message 10 of 13 (173 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 09:31 PM in reply to: BrianHailey

I can't find anything in the help system that states QTO works on XREF's. How did you learn about it Brian?

 

Another challenge: can we limit the extraction to the extents of clipped XREF's? I can't make that work.

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
http://www.sec-landmgt.com

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs