Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

QUESTIONS ? -> Give your VERSION & SP

71 REPLIES 71
Reply
Message 1 of 72
wfberry
3137 Views, 71 Replies

QUESTIONS ? -> Give your VERSION & SP

We have a new version (2012) but STILL people are asking questions without giving their particular Version and SP and

perhaps 32 or 64 bit, Operating System.

 

It CAN make a difference.  This is a friendly reminder.

 

Bill

 

(Jo-> I don't think a version is needed for this.)

71 REPLIES 71
Message 41 of 72
wfberry
in reply to: Murph_Map

With all the rain we have had (& Murph too, I assume) he may be employed as a sponge.

 

<G>

 

Bill

 

Message 42 of 72
AllenJessup
in reply to: wfberry


@wfberry wrote:

With all the rain we have had (& Murph too, I assume) he may be employed as a sponge.

 

<G>

 

Bill 


 

Or maybe designing Arks.

 

Allen



Allen Jessup
Engineering Specialist / CAD Manager

Message 43 of 72
Murph_Map
in reply to: wfberry

TGIF

Murph
Supporting the troops daily.
Message 44 of 72
AllenJessup
in reply to: Murph_Map

12



Allen Jessup
Engineering Specialist / CAD Manager

Message 45 of 72
wfberry
in reply to: Murph_Map

One more last time.

Message 46 of 72
wfberry
in reply to: wfberry

Maybe I lied.

 

Bill

Message 47 of 72
OMCUSNR
in reply to: AllenJessup

You know, the ark was a pretty good sized boat.  At 300 cubits i length, and a "royal" cubit being in the neighborhood of 16 to 18" in length, the Ark could be as long as 450' - no small craft even today.

 

There is a dutch reproduction:  http://www.pbase.com/paulthedane/noahs_ark 

 

Reid

Homebuilt box: I5-2500k, MSI P67A-GD65, 12gig DDR3 1600 ram, ASUS ENGTX460 Video card, WD Velociraptor WD4500HLHX HD, Win 7 64 pro.
Message 48 of 72
AllenJessup
in reply to: wfberry

go up



Allen Jessup
Engineering Specialist / CAD Manager

Message 49 of 72
AllenJessup
in reply to: AllenJessup

It looks like it's time to send this one up again. It makes it so much easier to give coherent answers when you have this information and a full explanation of the problem.

 

Allen



Allen Jessup
Engineering Specialist / CAD Manager

Message 50 of 72
AllenJessup
in reply to: wfberry

^



Allen Jessup
Engineering Specialist / CAD Manager

Message 51 of 72
Joe-Bouza
in reply to: AllenJessup

Kudos for everyoneSmiley Very Happy

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People)

HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win10 OS
Message 52 of 72
Adam_Farnsworth
in reply to: Joe-Bouza

I think it's time for a bump.

Windows 7 x 64
ATI Radeon HD 5700 Series
12 GB Ram
i7 920 @ 2.67 GHz
Civil 3D 2011, 2010, 2009 and occasionally 2008 still (unfortunantly)
Message 53 of 72
Adam_Farnsworth
in reply to: wfberry


@wfberry wrote:

We have a new version (2012) but STILL people are asking questions without giving their particular Version and SP and

perhaps 32 or 64 bit, Operating System.

 

It CAN make a difference.  This is a friendly reminder.

 

Bill

 

(Jo-> I don't think a version is needed for this.)


In addition to bumping, might as well repost the original post 🙂

Windows 7 x 64
ATI Radeon HD 5700 Series
12 GB Ram
i7 920 @ 2.67 GHz
Civil 3D 2011, 2010, 2009 and occasionally 2008 still (unfortunantly)
Message 54 of 72
Joe-Bouza
in reply to: Adam_Farnsworth

Oh special rules, I see Smiley Very Happy

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People)

HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win10 OS
Message 55 of 72
MarySeufert
in reply to: Joe-Bouza

Had to dig to page 13 to BUMP!!! Smiley Wink

 

~ Mary

EXPERT ELITE MEMBER
Message 56 of 72
AllenJessup
in reply to: MarySeufert

Yeah. I must admit I'm getting to the point where I just blow by post that consist of just one sentence along the line of "My drawing doesn't display correctly after I regen".

 

Bad me! Smiley Sad



Allen Jessup
Engineering Specialist / CAD Manager

Message 57 of 72
mathewkol
in reply to: wfberry

Allen, since we're on that subject, here's how to ask a good question to avoid having us simply "blow by" those bad ones. "Time sinks" in the article below.
http://catb.org/~esr/faqs/smart-questions.html
Matt Kolberg
SolidCAD Professional Services
http://www.solidcad.ca /
Message 58 of 72
AllenJessup
in reply to: mathewkol

Hello Matt,

 

Yes. I've seen that one before. Possibly you've posted it in the past.

 

Allen



Allen Jessup
Engineering Specialist / CAD Manager

Message 59 of 72
mathewkol
in reply to: wfberry

I have, but it's been a while. Figured it was time to pull it out again.
Matt Kolberg
SolidCAD Professional Services
http://www.solidcad.ca /
Message 60 of 72

Once more.



If a post provides a fix for your issue, click on "Accept as Solution" to help other users find solutions to problems they might have that are similar to yours.

Andrew Puller
Maitland, NSW, Australia
Windows 10 Enterprise 64bit
Intel core i7 11800 @ 2.30 GHz with 32GB Ram
Civil 3d 2021

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report