AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Member
joseph.stadheim
Posts: 3
Registered: ‎12-14-2009
Message 1 of 7 (179 Views)

Profile Info Disappearing

179 Views, 6 Replies
01-16-2013 06:21 AM

Good Morning,

 

I am running 2012 C3d and I am having an issue when a drawing is freshly opened, some of the profile data is not showing and it will show up after I sync the different information that is missing.  The issue with this is that when I run a publish of multiple projects that info dosen't show and I have to go into each project to sync the info and plot each sheet seperatly.  Does anybody have any ideas on how to reslove this issue?  Thanks in advace for any help and have a good day.

 

Joe

Member
joseph.stadheim
Posts: 3
Registered: ‎12-14-2009
Message 2 of 7 (176 Views)

Re: Profile Info Disappearing

01-16-2013 06:25 AM in reply to: joseph.stadheim

I should give a bit more info.  The p&p sheets are created in their own drawing and all the alignment, profile, and pipe network info are referenced in. 

*Expert Elite*
Jeff_M
Posts: 4,293
Registered: ‎07-22-2003
Message 3 of 7 (170 Views)

Re: Profile Info Disappearing

01-16-2013 06:51 AM in reply to: joseph.stadheim

Do you have SP2.1 installed? If so, this is an issue I've been working with Seth Hall at Autodesk for months now. No known resolution as of yet. 

Jeff_M, also a frequent Swamper
Member
joseph.stadheim
Posts: 3
Registered: ‎12-14-2009
Message 4 of 7 (167 Views)

Re: Profile Info Disappearing

01-16-2013 06:54 AM in reply to: Jeff_M

I do have that service pack installed.  Thanks for the update.  Would you be willing to update the thread as info becomes available? 

*Expert Elite*
Jeff_M
Posts: 4,293
Registered: ‎07-22-2003
Message 5 of 7 (165 Views)

Re: Profile Info Disappearing

01-16-2013 06:58 AM in reply to: joseph.stadheim

I will try. If you would log a support request through the subscription center, or the Autedesk feedback portal, and make it attention Seth Hall, it may help to get some action on this. Although with 2014's release only a few months away, I'm not sure how much effort they will be expending on this 2012 issue, even though it is an issue that affects ONLY this Service Pack.

Jeff_M, also a frequent Swamper
Valued Mentor
ralstogj
Posts: 607
Registered: ‎10-01-2006
Message 6 of 7 (96 Views)

Re: Profile Info Disappearing

05-08-2013 06:13 PM in reply to: Jeff_M

Jeff

 

I seem to be having a similar problem in 2012, the profile data that is referenced is going but this is because the data in the corridor surface in the model file is disappearing. If i  force a rebuild of the corridor in the model and then re sync it still does not come back.

 

Do you have to recut profiles ever time you need to print?

 

Did you ever get a solution?

Regards

Justin Ralston
http://c3dxtreme.blogspot.com/
*Expert Elite*
Jay_B
Posts: 2,272
Registered: ‎09-15-2010
Message 7 of 7 (88 Views)

Re: Profile Info Disappearing

05-08-2013 06:59 PM in reply to: ralstogj

See if  This thread is similar to your profile issues?

Jay

C3D 2014 SP2
Win 7 Professional 64 Bit
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.