AutoCAD Civil 3D General

Reply
*Expert Elite*
troma
Posts: 2,519
Registered: ‎05-21-2008
Message 1 of 6 (443 Views)
Accepted Solution

Profile Geometry Points of Superimposed Profile to Alignment Label

443 Views, 5 Replies
03-01-2013 02:37 PM

I have an alignment label that I normally use to show the PVI's of a profile in the plan view.

 

This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another.  I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view.  I then went back to the swale alignment to add these labels.

It's a no-go AFAICT.  The only profile available for me to select for these labels is the original ground profile from the surface.

Any thoughts?


Credit where credit is due! Give kudos or accept as solution whenever you can.

*Expert Elite*
wfberry
Posts: 1,747
Registered: ‎09-05-2006
Message 2 of 6 (396 Views)

Re: Profile Geometry Points of Superimposed Profile to Alignment Label

03-03-2013 07:21 AM in reply to: troma

I think you are correct with your assessment  I could see a problem with labeling, e.g.,  Sta 1+00 on one profile would probably not be Sta 1+00 on the other, thus leading to complaints of "mis-labeling".

 

Bill

 

*Expert Elite*
Joe-Bouza
Posts: 4,741
Registered: ‎12-15-2008
Message 3 of 6 (390 Views)

Re: Profile Geometry Points of Superimposed Profile to Alignment Label

03-03-2013 12:04 PM in reply to: troma

You did not mention adding a profile reference component to your lable style. You should be able to do this and then select the desired profile.

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
BrianHailey
Posts: 2,748
Registered: ‎04-27-2005
Message 4 of 6 (385 Views)

Re: Profile Geometry Points of Superimposed Profile to Alignment Label

03-03-2013 01:38 PM in reply to: Joe-Bouza

Joe,

 

The label style, although you can add a reference to another profile, will only lable the profile geometry points of the profile associated with that alignment. In other words, you can label that other profiles information but, you can't tell it to label at the geometry points of that other profile.

 

*Expert Elite*
Joe-Bouza
Posts: 4,741
Registered: ‎12-15-2008
Message 5 of 6 (376 Views)

Re: Profile Geometry Points of Superimposed Profile to Alignment Label

03-03-2013 04:52 PM in reply to: BrianHailey

Brian,

 

I see

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
troma
Posts: 2,519
Registered: ‎05-21-2008
Message 6 of 6 (348 Views)

Re: Profile Geometry Points of Superimposed Profile to Alignment Label

03-04-2013 05:25 AM in reply to: BrianHailey

Hey, thanks for coming in on the weekend guys!

 

What you're saying is making sense.  My labels that come in at regular stations work, and the ones at horizontal PI's work.  Both of these are reference text, as Joe suggested.  The ones designed for Vertical PI's don't work, as Brian said.  I guess I shouldn't be too surprised about that considering that the superimposed profile can't even label PVI's or Grade labels in profile view either.


Credit where credit is due! Give kudos or accept as solution whenever you can.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs