Ok, I have multiple surfaces representing topsoil, clay and types of bedrock, and an alignment set with sample lines and sections set. Trying to use the Compute Materials using material lists and the corresponding shape style to hatch between each surface something is going wrong. With all the display settings (Plan,Section,Profile,etc) set to by layer and on a created layer(not on 0). The shape area fill is set to solid. It will not display the hatch. I'm wondering if I am skipping a step in the Material list setup or something... Any Ideas if you need further explination or more info (I know im bad at explaining things) please post it.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")