Hi all,
Up to now, I was able to trim contour (elevation) lines simply by drawing a polyline across the contour lines and use the trim command. But the function suddenly stop to work on my computer.
I have tried the function on other computers and it works very well.
Now, on my computer, I can only trim one contour line after the other by adjusting the polyline to the same elevation as the contour line. This is rediculous if I have to trim hundreds of contour lines.
Because the problem is only on my computer, I suppose i have mistakenly apply a command that have change the settings on my computer.
I have reviewed my settings but cannot identify the problem.
Any suggestions?
Sounds like you need to change the 'Project' option to UCS. Check the command line after you execute the Trim command. You enter P for Project.
Add a Boundary Definition to your surface.
Dave
Dave Stoll
Las Vegas, Nevada
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I think we need to know exactly what program and version you are using. When you select these contour lines are they polylines? If so, where did they originate?
Bill