AutoCAD Civil 3D General Discussion

Reply
Contributor
graphtype
Posts: 15
Registered: ‎12-17-2012
Message 1 of 5 (428 Views)
Accepted Solution

Point label style in Pspace significantly smaller than Mspace

428 Views, 4 Replies
01-02-2013 10:12 AM

Hi there!

 

I'm a bit new to the concepts of point labels in C3D; I browsed around for a bit for a solution and haven't been successful. I'm having troubles with my point label styles in Paperspace - they appear about 25x smaller than in model space, but both are the same scale. 

 

This is my label style setup: 

 

anostyle3.png

 

This is how it appears in modelspace: 

anostyle2.jpg

 

This is my viewport settings and how it appears in paperspace (zoomed in):

anostyle1.png

 

The text height in MS is 2mm, and approx 0.078mm in PS. 

 

Any assistance would be greatly appreciated.

 

--Lawrence.
*Expert Elite*
TRogers
Posts: 1,247
Registered: ‎09-05-2007
Message 2 of 5 (418 Views)

Re: Point label style in Pspace significantly smaller than Mspace

01-02-2013 11:05 AM in reply to: graphtype

They should automatically "size" themselves based on the scale of the viewport.

If the issue was resolved by this method, please click on "Accept As Solution"
*Civil 3DJ*
Todd Rogers

Visit my blog here.

     
*Expert Elite*
troma
Posts: 2,519
Registered: ‎05-21-2008
Message 3 of 5 (405 Views)

Re: Point label style in Pspace significantly smaller than Mspace

01-02-2013 11:40 AM in reply to: graphtype

Check the Units in the page setup for the layout.  They need to be set to the same units as your layout.  (Looks like you're in mm, these units often get reset to inches so that's where I'd check first.)


Credit where credit is due! Give kudos or accept as solution whenever you can.

Mentor
coopdetat
Posts: 196
Registered: ‎03-25-2011
Message 4 of 5 (398 Views)

Re: Point label style in Pspace significantly smaller than Mspace

01-02-2013 11:55 AM in reply to: graphtype

I had a similar (maybe identical) problem that was isolated to the plot device in the page setup I was using.  Specifically, if the plot device is a raster plot device, that will cause the problem.  I worked directly with some Autodesk engineers to identify the cause.  They acknowledged (confirmed) that raster device was the source of the problem... there was no projection regarding when the issue would be fixed.  My conclusion was that the improper treatment of raster output as "dimensionless" led to the faulty coding that  causes this problem. Dots-Per-Inch (dpi) is an explicit dimension that should be applied to the raster output but it is not.

 

The prior discussion is here: http://forums.autodesk.com/t5/AutoCAD-Civil-3D/Improper-scaling-of-point-label-styles-using-quot-dim...

 

P.S. it turns out the the difference is a factor of 12, I don't know why.  If you change the plotter in the page setup to a typical plotter (HP, etc.) my problem would go away.  Not a good solution for me because I always plot to TIFF, a raster format and I can't plot w/o the problem in the way.

---------------------------------------------Signature--------------------------------------------
Civil Design Professional Since 1983 (Intergraph), AutoCAD since 1989
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2014, sp1
Contributor
graphtype
Posts: 15
Registered: ‎12-17-2012
Message 5 of 5 (356 Views)

Re: Point label style in Pspace significantly smaller than Mspace

01-03-2013 08:10 AM in reply to: troma

Thanks guys. Troma was right - the page setup units somehow got changed from mm to inches and simply changing that fixed the size. I kept trying to figure out what was wrong with my point label style but couldn't find anything.. that was a simple fix haha. 

--Lawrence.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs