Point Markers Not Printing

[mconway]

I have COGO Point Marker Styles that have a custom marker set to "View" Orientation. When I am in Plan View, they print fine. When I orbit to Front or Side View, I can see that they are "Rotating so that I can see them, but, they will not print.

Any Ideas?

[andrewpuller3811]

I would look into the block you are using for the marker.

Check if the blocks components are on a non-plotting layer.

Also check the layers in the point style to see if they are set to non-plotting layers.

[mconway]

Andrew,

  Sorry for the delay. I was teaching a class last week and had no opportinity to reply.

Neither of your great suggestions are the issue. I am using a Civil 3D Custom Marker (not a block). Maybe I can look into changing that. I also checked all of the layer settings thay are all set to Plot.

  I thinks this maybe something to do with scaling. I have now noticed that the markers are plotting but very small.

[AllenJessup]

Check your Point Marker Style and make sure the marker is visible in Model as well as Plan.

Allen

[mconway · Accepted solution]

All of those settings were correct. There seems to be an issue with Custom Markers Printing in Model Views. I have tried various settings in 2014 and 2015. In the end I created a Multi-view Block and assigned it to the marker. Works great!

[mconway]

Also, Model views will not plot with a 2D AutoCAD Block Symbol Set to View Orientation in Marker Style. Maybe something for Autodesk to look at.