AutoCAD Civil 3D General

Reply
Member
rremmers
Posts: 4
Registered: ‎09-20-2004
Message 1 of 7 (86 Views)

Pofile Linetype Generation

86 Views, 6 Replies
09-20-2004 01:44 PM
Hi all,

I have created an existing ground profile and I want it to display as a hidden line. I can do that by editing the profile style, however the line appears as though the linetype generation is disabled. Since it is not a polyline I am unable to select it and change it in the Object Properties box.

Does anyone know if it is possible to change this? Does it work any differently with C3D 2005? Should this be a wish list item? Thanks for any help,

Ray
*James Wedding
Message 2 of 7 (86 Views)

Re: Pofile Linetype Generation

09-20-2004 02:45 PM in reply to: rremmers
ltypegen being on before the profile is generated _might_ help, but don't hold me to that. Good luck! -- James Wedding, P.E. IT Manager Jones & Boyd, Inc. Dallas, TX XP/2 on P4-3.4/1G LDT2005+C3D http://au.autodesk.com Sign up now for AU2004!
Member
rremmers
Posts: 4
Registered: ‎09-20-2004
Message 3 of 7 (86 Views)

Re: Pofile Linetype Generation

09-20-2004 02:55 PM in reply to: rremmers
I did try that and it did not work. Thanks for the suggestion.

Ray
*H Gohel
Message 4 of 7 (86 Views)

Re: Pofile Linetype Generation

10-29-2004 08:53 AM in reply to: rremmers
"rremmers" wrote in message news:17512081.1095713111800.JavaMail.jive@jiveforum2.autodesk.com... > I have created an existing ground profile and I want it to display as a hidden line. I can do that by editing the profile style, however the line appears as though the linetype generation is disabled. Since it is not a polyline I am unable to select it and change it in the Object Properties box. > > Does anyone know if it is possible to change this? Does it work any differently with C3D 2005? Should this be a wish list item? Thanks for any help, Hi Ray, In C3D 2005, I am able to edit the profile style, set the line type to HIDDEN and modify the LT scale to a higher number in order to see the actual pattern on the EG profile. Himanshu
*James Wedding
Message 5 of 7 (86 Views)

Re: Pofile Linetype Generation

10-29-2004 09:08 AM in reply to: rremmers
Are you sure about that? That might work on proposed profiles where the length between vertices is fairly high, but I don't think it works on things like surface profiles where the nodes are tight. PLINEGEN is being ignored by the Profile object. It's been logged IIRC, talk with Dan Philbrick. -- James Wedding, P.E. IT Manager Jones & Boyd, Inc. Dallas, TX XP/2 on P4-3.4/1G LDT2005+C3D http://au.autodesk.com Sign up now for AU2004!
*H Gohel
Message 6 of 7 (86 Views)

Re: Pofile Linetype Generation

10-29-2004 11:19 AM in reply to: rremmers
"James Wedding" wrote in message news:41826b07$1_2@newsprd01... > Are you sure about that? That might work on proposed profiles where the > length between vertices is fairly high, but I don't think it works on things > like surface profiles where the nodes are tight. PLINEGEN is being ignored > by the Profile object. It's been logged IIRC, talk with Dan Philbrick. James, you are correct, PLINEGEN is not being honored at the moment. My reading of the original poster's message was that the _line type_ was not working, and hence my reply. When I re-read the message now, I'm not so clear whether Ray was saying that the line type (pattern) wasn't working, or as you say, the PLINEGEN flag was not being honored. -- Himanshu
Member
rremmers
Posts: 4
Registered: ‎09-20-2004
Message 7 of 7 (86 Views)

Re: Pofile Linetype Generation

11-01-2004 11:34 AM in reply to: rremmers
Yes, my issue is that PLINEGEN is not being honored. I take it this issue has already been raised and discussed and it is what it is for now. Thanks for your replies.

Ray

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs