Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Anyone experiencing plot canceling when sid files
are attached? It has been plaguing me for a while now, and it does not happen if
I plot from the other application (LDT)
-- Thanks, Joe
Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2008 Win XP
pro v 2002, sp 2 hp workstation xw4600 Intel Core Duo CPU E7200
@2.53 GHz 3 GB RAM NIVDIA Quadro FX 1700
(512MB) ============================== "All Contours are Lies! "-(
AJ) =========================== The mantra of a former Flamer: If you
are forced to eat an Elephant, don’t complain about it; Take one bite at a
time. ***************************************************************************************** In
memory of the King of Work-arounds "The only Constant is Change".
"The only thing worse than training your staff, and having them leave is
- not training your staff, and having them stay." 😮 A reminder taken
from Graphics Solution Providers' Calendar
page ***************************************************************************************** "An
Equal Opportunity Annoyer" (DK)
i found that with civil 3d , i need to create a viewport, then it plots fine, if i plot from modelspace, it either bombs out or times out, or locks up completely.
Do you have Raster Design? Is it up to date? If not did you install the
Raster Design Object Enabler? I am pretty sure you need one or the other for
08. Have you had success with sids previously?
Anyone experiencing plot canceling when sid files
are attached? It has been plaguing me for a while now, and it does not happen
if I plot from the other application (LDT)
size=2>
-- Thanks, Joe
Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2008 Win XP
pro v 2002, sp 2 hp workstation xw4600 Intel Core Duo CPU E7200
@2.53 GHz 3 GB RAM NIVDIA Quadro FX 1700
(512MB) ============================== "All Contours are Lies! "-(
AJ) =========================== The mantra of a former Flamer: If you
are forced to eat an Elephant, don’t complain about it; Take one bite at a
time. ***************************************************************************************** In
memory of the King of Work-arounds "The only Constant is Change".
"The only thing worse than training your staff, and having them leave is
- not training your staff, and having them stay." 😮 A reminder taken
from Graphics Solution Providers' Calendar
page ***************************************************************************************** "An
Equal Opportunity Annoyer" (DK)
Might want to be sure the users temp folder and mapcache folders get cleaned
out also.
--
Murph
http://map3d.wordpress.com/
wrote in message
news:6285113@discussion.autodesk.com...
There was a great posting by Justin Ziemba on Being Civil regarding
troubleshooting raster image plotting here:
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")