Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Please need help Depth analysis between two surface
Please need help Depth analysis between two surface
I have two surface ( OG surface and Gravel LIFT ), i need to have a table that Show me Depths range between those two surface with a color range, in a table and also to be able to see it in the the top surface.
Basically, In every Spot of the surface, need to represent a Depth range between the OG and the gravel surface by a specific Color.
What you need to do is create a TIN Volume Surface. That surface will be the comparison between the other two. Simply apply Elevation syle settings and range values as you would for a normal surface, but these values will represent the differences in your two surfaces not actual elevations.
Tim
Tim Corey MicroCAD Training and Consulting, Inc. Redding, CA Autodesk Gold Reseller
New knowledge is the most valuable commodity on earth. -- Kurt Vonnegut
...And you can add surface labels on a grid over the surface if thats the kind of thing you like.
Joe Bouza Did you find this post helpful? Feel free to Like this post. Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I had been over TIN Volume Surfaces several times and didn't understand it. My client has been asking if I could produce fill volume and lift reports and I just answered "yes" because I knew Civil 3D could do it. All I managed to find by myself was Volumes and Minimum Distance Between Surfaces.
This is great and is another reason to not switch to Carlson!
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")