Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
When creating plan and profile sheets is it possible to create the plan view with the alignment moved down to show more of project above the alignment? The default setting puts the alignment at the center of the plan view window.
To handle this ahead of time, move your view frame. If you want to do it later, just pan within the viewport that was created on the sheet's layout tab.
Tim Corey MicroCAD Training and Consulting, Inc. Redding, CA Autodesk Gold Reseller
New knowledge is the most valuable commodity on earth. -- Kurt Vonnegut
Oops, I spoke before I tested. You can't Move the view frame with the Move command. You have to use the square grip that appears after you select the frame.
Tim Corey MicroCAD Training and Consulting, Inc. Redding, CA Autodesk Gold Reseller
New knowledge is the most valuable commodity on earth. -- Kurt Vonnegut
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")